Bewakingscamera Pelco CCC5100H-6A

De CCC5100H Series is een camera met een hoge resolutie en een groot dynamisch bereik. De camera ondersteund DC-drive auto iris lenzen alsmede C en CM mount lenzen. Ook ondersteund de camera automatisch Coaxitron® en de Pelco D en Pelco P protocollen.
Gebruikt/Getest
3 maanden garantie
Zonder lens
20 voorraad
GENERAL
Imaging Device 1/3-inch SIMD
Dynamic Range 95 dB typical/120 dB maximum
Picture Elements Sensor resolution: 742 (H) x 552 (V)
Scanning System 625 (PAL) lines, 2:1 interlace
Synchronization Internal/line lock/Pelco V-Sync
Horizontal Resolution More than 480 TV lines
Iris Control Automatic/manual
Electronic Shutter Range 1/15 to 1/3,500 second
Auto Iris Lens Type DC-drive
Minimum Illumination 0.8 lux, F1.2, 40 IRE, AGC on, 75% scene reflectance
Signal-to-Noise Ratio >50 dB
Vertical Phase Adjustable ±120°
Automatic Gain Control On-screen menu, adjustable to 21 dB
Backlight Compensation On-screen menu, four regions
Signal Processing SIMD digital signal processing (DSP)
Video Output 1.0 to 1.2 Vp-p, 75 ohms, adjustable
Auto White Balance Range 2,000° to 11,000°K
Gamma Correction 0.36 PAL, adjustable (0.25-1.00)
ELECTRICAL
Power Requirements 12-36 VDC ±10% or 24-28 VAC ±10%, 47-63 Hz; autosensing
Power Consumption 4.5 watts maximum
Power Connector 2-pin terminal strip, push-in type, with screw lock
Video Connector BNC
Multifunction Connector 10-pin RJ45-10:
. Analog composite video
. Unshielded twisted pair (UTP) video
. Low voltage power (CCC51x0H-6)
. Data I/O (Pelco P or Pelco D protocol)
Service Connector 3-conductor, 2.5 mm connector for optional CST150/CST100 camera setup tool
Auto Iris Connector 4-pin connector (miniature square)
MECHANICAL
Lens Mount C/CS mount
Camera Mount 1/4-inch UNC-20 screw, top or bottom of camera housing